Smeg STA4645U manual Introduction, Nomenclature of figures and tables

INTRODUCTION EN

1 INTRODUCTION

Thank you for choosing one of our products. To install this dish- washer correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to installation of the appliance. The texts are easy to understand and are complete with detailed illustrations. This user-friendly manual will provide answers to all your questions about installation of the dish- washer.

This manual comprises the following sections:

INTRODUCTION: general information about the manual.

WARNINGS: a list of warnings concerning safety during installation.

INSTALLATION INSTRUCTIONS: for the qualified technician who must carry out the installation, hook-up and testing of the appli- ance.

Nomenclature of figures and tables:

The progressive number of each fi gure is shown in the bottom right- hand corner of the relative box. An example of a progressive number is “Fig. 4-01”, where the fi rst number (4) indicates the section to which the fi gure belongs, while the second number (01) indicates the progressive number of the fi gure in section 4 (Fig. 4-01 is the

first fi gure in section 4). The tables are numbered in the same way, bearing in mind that “Tab.” is used instead of “Fig.” (e.g.: Tab. 4-01 is the fi rst table in section 4). If a table occupies more than one page, a letter is added after the progressive number (e.g.: “Tab. 4-01a”, Tab. 4-01b”).

Rev 0.0 3