4.2.3 Adding the detergent

USER INSTRUCTIONS

EN

To adjust the rinse aid setting, rotate the dispenser cover (ref. A fi g. 4-04) through a quarter turn in an anticlockwise direction and remove it.

Then use a screwdriver to rotate the rinse aid selector to the desired posi- tion.

Replace the cover (ref. A fi g. 4-04) by turning it in a clockwise direction until it is fully closed.

The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains.

If, on the other hand, the dishes are sticky or have white streaks, it is neces- sary to reduce the rinse aid setting.

4.2.3 Adding the detergent

DO NOT INHALE OR SWALLOW DETERGENT AS THIS MAY CAUSE BURNS AND/OR PERMANENT DAMAGE TO THE NOSE, MOUTH AND THROAT, AND EVEN LEADING TO SUFFOCATION; KEEP DE- TERGENT AWAY FROM YOUR EYES. IF ONE OF THE ABOVE SITU- ATIONS OCCURS, SEEK MEDICAL ASSISTANCE IMMEDIATELY.

PREVENT CHILDREN FROM COMING INTO CONTACT WITH DE- TERGENT; KEEP THEM AWAY FROM THE DISHWASHER WHEN THE DOOR IS OPEN AS IT MAY CONTAIN DETERGENT RESIDUES. FILL THE DISHWASHER JUST BEFORE STARTING THE WASHING CYCLE AND THEN KEEP THE DETERGENT OUT OF THE REACH OF CHILDREN.

To open the detergent dispenser cover, lightly press the relative button (ref. A

g. 4-05). Add the detergent and close the cover carefully. During the washing cycle, the dispenser will be opened automatically.

A

Fig. 4-05

Rev 0.0

19

Page 36
Image 36
Smeg STA4645U manual Adding the detergent, User Instructions