Smeg STA4645U manual Connecting the drain hose Connecting to a drain, Installation Instructions

INSTALLATION INSTRUCTIONS EN

5.2.1.2 Connecting the drain hose

Connecting to a drain

Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”)(ref. A fi g. 5-09); alternatively, place the hose on the sink (ref. B fi g. 5-09) using the supplied hose support (see fi g. 5-10), but taking care to avoid obstructions or excessive curving. Make sure the hose cannot fall out. For this purpose, the hose support is fi tted with a hole (ref. A fi g. 5-10) which can be used to fi x it to the wall or the tap with a piece of string. The free end must lie at a height ranging from of 30 to 100 cm (from of 1-7/32” to 3-59/64”)(see fi g. 5-09) and must never be immerged in water. If horizontal extension hoses with a maximum length of 3m are used, position the drain hose at a maximum height of 85 cm (3-11/32”)above the fl oor.

B				MAX 100 cm
					3-59/64”
		30mincm
	A		7/32”-1
	min O4 cm
	1-37/64”

Fig. 5-09

A

Fig. 5-10

Rev 0.0 19