Smeg STA4645U manual User Instructions, Etl Sanitation, Listed

	USER INSTRUCTIONS					EN
PROGRAM NUMBER		DISHES AND	PROGRAM	TIME	CONSUMPTION
				MINUTES	WATER	ENERGY
	AND SYMBOL	CUTLERY	SEQUENCE
				(2)	(1)	KWh (2)
		Pans and
1	RINSE	dishes waiting	Cold pre-wash	16’	4.1 l	0.02
		for further			1.08 gal.
		washing
		Immediate	Wash at 45°C
			(113°F).
		washing
			Cold rinse.		11.5 l
2	CRYSTAL	after use for		58’		0.53
			Rinse at 69°C		3.04 gal.
		moderately
			(156.2°F).
		dirty dishes
			Dry.
			Cold pre-wash.
		Immediate	Wash at 55°C
		washing	(131°F).		16.3 l
3	NORMAL	after use for	Cold rinse.	111’		0.68
					4.31 gal.
		normally dirty	Rinse at 68°C
		dishes	(154.4°F).
			Dry.
			Cold pre-wash.
			(Depending of the
			type of dirty)
	AUTO	Normally dirty	Wash at 55°C		12-16 l
4			(131°F).	90’-105’	3.17-	0.6-0.8
	DELICATE	dishes	Cold rinse.		4.23 gal.
			Hot rinse at 69°C
			(156.2°F).
			Dry.
			Pre-wash at 45°C
	EXTREME		(113°F).
		Very dirty pans	Wash at 70°C
	WASH
5		and dishes	(158°F).	117’	20 l	0,97
		(except	2 cold rinses.		5.28 gal.
	ETL SANITATION
		delicate items)	Rinse at 70°C
	LISTED
			(158°F).
			Dry.

Tab. 2-02

(1) Average water consumption with the softener set to level 0 (zero).

Any other setting will increase water consumption till 2.5 l (0.66 gal.)/cycles with setting 5.

(2)The cycle times listed in the use and care manual are based on normal soil loads and 120°F (49°C) incoming water and will vary based on your actual conditions.

- Only “EXTREME WASH” program conform to NSF std 184 and is certifi ed by INTERTEK with the

ETL SANITATION LISTED.

- When the “Sanitized” light shine it means that the dishwasher and its contents have been sani- tized according to the requirements of the National Sanitation Foundation (NSF).

- When the “AUTO DELICATE” is selected, the dishwasher recognizes the type of dirt and auto- matically adjusts the washing parameters as appropriate.

Rev 0.0 7