Smooth Fitness V2300 owner manual Short Extension Pulse Wire & Rail Decoration Assembly

“ASSEMBLY INSTRUCTIONS”

USE HARDWARE KIT B

STEP 8 – Short Extension Pulse Wire & Rail Decoration Assembly

a.Follow FIG.1 to plug the Short Extension Pulse Wire (183) into the connector located on the front bottom side of the

Seat Rail (91).

b.Attach the Left Rail Decoration Cover (41) and the Right Rail Decoration Cover (42) to the rear side of the Seat Rail (91) and secure with one Self-Tapping Screw, Truss Head (M4x20mm)(131) and two Screws, Round Head (M5xp0.8x15mm)(138).

STEP 9 – Adjusting Handle Assembly

a.Attach the Adjusting Handle (55) to the Adjusting Handle Stand to the proper position.

b.Secure the Adjusting Handle (55) by rotating the Nut (M8)(168) in counterclockwise direction until completely tight against Adjusting Handle (55). NOTE: Please notice that the Nut (M8)(168) has been pre-assembled on the Adjusting Handle Stand.

**Make sure the above parts are tightened before moving on to the next page**

10