“HARDWARE IDENTIFICATION CHART”
Unpack the box in a clear area. Follow the List of Hardware Kit below. This chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. Do not dispose of the packing material.
NOTICE: The length of all bolts and screws except those with flat heads is Measured from below the head to the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw
After unpacking the unit, please note that there are 3 hardware bags (HARDWARE KIT A, HARDWARE KIT B and
HARDWARE KIT C).
Assembly’s Step 1 ~ 5: Will use HARDWARE KIT A
Assembly’s Step 6 ~ 10: Will use HARDWARE KIT B
Assembly’s Step 11 ~ 12: Will use HARDWARE KIT C
Note:
Please review the list below to ensure that the contents are present (A, B and C)
Some small parts may have been
HARDWARE KIT A | Part No. and Description | Q’TY | |
| 121 | Lock Washer (M8) | 4 pcs |
| 124 Washer (8x23x2.0t) | 2 pcs | |
| 139 | Screw, Round Head (M5xp0.8x40mm) | 1 pcs |
| 154 | Bolt, Button Head (M8xp1.25x30mm) | 2 pcs |
| 162 | Bolt, Socket Head (M8xp1.25x70mm) | 2 pcs |
| 164 | Carriage Bolt (M8xp1.25x90mm) | 2 pcs |
| 171 | Nylock Nut (M8xp1.25) | 2 pcs |
4
