Section 2 - OPERATING INSTRUCTIONS
2.6.ROLLING TRACTOR WITH ENGINE OFF Rolling Hydro Models
1.With engine "OFF", move to rear of tractor.
2.Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.15.
PULL ROLL RELEASE
CONTROL ALL THE WAY
OUT TO DISENGAGE
HYDRO TRANSMISSION
ROLL RELEASE
CONTROL
PUSH ROLL RELEASE CONTROL ALL THE WAY IN TO ENGAGE HYDRO TRANSMISSION
ROLL RELEASE CONTROL
FIGURE 2.15
3.Move tractor to desired location.
4.Set park brake.
5.Push roll release control all the way in to engage hydro transmission. See Figure 2.15.
NOTE: The transmission will not propel the tractor if it is left in the "ROLL" position.
10
