Snapper LT180H48FBV2 Maintenance Schedule, Maintenance Parts, Tractor, Drive Belts, Mower Blades

MAINTENANCE SCHEDULE

SUBJECT	SERVICE	REFERENCE	EACH	5	25	50	100	EACH
	TO BE PERFORMED	PAGES	USE	HOURS	HOURS	HOURS	HOURS	SEASON
Engine	Check Oil Level	Page 6	X
Engine	Initial Oil Change	Page 11		X
Engine	Periodic Oil Change	Page 12				X*
Air Pre-Cleaner	Service Sponge Pre-	Engine Manual			X**
	Cleaner Element
Air Cleaner	Replace Element	Engine			X**
		Manual.
Spark Plug	Replace Plugs	Engine Manual					X
		14.
Fuel Filter	Replace Filter	Page 14					X
Engine Cooling	Clean Shrouds & Fins	Engine Manual					X**
System
Battery	Check Electrolyte	Page 29-30			X			X
Battery	Charge Battery	Page 29-30						X
Tires	Check Pressures	Page 6	X					X
Drive Belts	Check For Wear And	Pages 23-28			X			X
	Tension
Mower Blades	Check For Wear And	Pages 20-22	X
	Damage
Mower Deck	Clean Debris	Page 12	X		X			X
	Accumulation
Mower	Clean Outside and	Page 12	X		X			X
Deck	Underside
Lubrication	Grease or Oil	Pages 12-13			X			X
Points
Hydrostatic	Check Oil Level	Page 14						X
Trans. Oil

*Change oil every 25 hours when operating under heavy load or high temperatures. **Clean more often under dusty conditions or when air debris is present

MAINTENANCE PARTS

TRACTOR		DRIVE BELTS			MOWER BLADES
MODEL No.	Engine to Transmission		Engine to Deck	Spindle to Spindle	Standard	NINJA
LT160H42FBV	7-3026		2-9205	---	2-6691	2-6407
LT160H42FBV2	7-3026		2-9205	---	2-6691	2-6407
LT180H48FBV2	7-2657		4-6926	2-8334	2-9247	---

37