CD Player CD/MD Changer (optional)

In addition to playing a CD with this unit, you can also control external CD/MD changer.

Playing a disc

(With this unit)1 Press Z to open the front panel, and insert the disc (labelled side up).

The front panel closes and playback starts automatically.

If a disc is already inserted, press (SOURCE) repeatedly until “CD” appears to start playback.

Note

The front panel closes automatically after the caution alarm sounds.

Operation by the card remote commander:

To

Pause*1

Press (6) (PAUSE).

Stop playback

Press (OFF).

 

 

Skip tracks*2

Press </,

– Automatic

[once for each track].

Music Sensor

 

 

 

Fast-forward/

Press </,

reverse

[hold until the desired

– Manual Search

point].

 

 

Skip groups*3

Press M/m

– Group selection

[hold until the desired

 

group].

 

 

Skip discs

Press M/m

– Disc selection

[once for each disc].

 

 

Operation by the main unit:

To

Stop playback

Press (OFF).

 

 

Eject the disc

Press Z.

 

 

Skip tracks

Rotate the R dial

–Automatic Music [until the desired track]. Sensor

Skip groups*3

Press (ENTER), then rotate

– Group selection

the R dial

 

[until the desired group].

 

 

Skip discs

Press (ENTER), then rotate

– Disc selection

the R dial

 

[until the desired disc].

 

 

*1 Pause is available only when playing back on this unit (when playing back on the optional unit, pause is not available). To cancel pause, press (6) (PAUSE) again.

*2 To skip tracks continuously, press < or ,, then press again and hold within about 2 seconds.

*3 When an MP3/ATRAC CD is played.

Notes

•There is a delay for a few seconds after pressing Z before the disc is ejected, while the data in the disc is being read.

•If you press Z on the front panel to eject a disc and leave it in the slot, the disc protective function will work. The ejected disc will be automatically pulled into the slot 15 seconds after being ejected.

•Do not apply excessive pressure to the front panel (especially when it is open), as this may cause a malfunction.

•Depending on the recording method used on the disc, it may take a minute or more before playing the first track.

•Depending on the condition of the disc, it may not play back (page 34, 35 and 36).

•While the first/last track on the disc is playing, if < or , is pressed, playback skips to the last/first track of the disc.

•When the last track on the disc has finished, playback restarts from the first track of the disc.

(With optional changer)1 Press (SOURCE) repeatedly until “CD,” “MD” appears.2 Press (MODE) repeatedly until the desired changer appears.

Playback starts.

13