Press (MENU).
Press (MENU).
Press (MENU).
3 Press < or , repeatedly to select “Wallpaper,” then press (ENTER).

4 Press < or , repeatedly to select “Select,” then press (ENTER).

5 Press < or , repeatedly to select the desired image, then press (ENTER).

6 Press (MENU).

The display returns to the normal display.

Changing images automatically

1

2 Press < or , repeatedly to select “Display,” then press (ENTER).

3 Press < or , repeatedly to select “Wallpaper,” then press (ENTER).

4 Press < or , repeatedly to select “Auto,” then press (ENTER).

5 Press < or , repeatedly to select the desired speed, “FAST,” “MIDDLE,” or “SLOW,” then press (ENTER).

6 Press (MENU).

The display returns to the normal display.

To cancel the image change, select “OFF” in step 5.

Selecting the images to be displayed

You can select:

•USER – to display user stored images in sequence.

•ALL – to display pre-stored/user stored images in sequence.

1

2 Press < or , repeatedly to select “Display,” then press (ENTER).

3 Press < or , repeatedly to select “Wallpaper,” then press (ENTER).

4 Press < or , repeatedly to select “Arrange,” then press (ENTER).5 Press < or , repeatedly to select “USER” or “ALL,” then press (ENTER).

6 Press (MENU).

The display returns to the normal display.

Note

“Arrange” in the menu can not be selected when no user images are stored.

Setting a panorama image— Panorama

You can select a panorama image as a wallpaper which scrolls automatically.

1

2 Press < or , repeatedly to select “Display,” then press (ENTER).

3 Press < or , repeatedly to select “Panorama,” then press (ENTER).4 Press < or , repeatedly to select the desired image, then press (ENTER).

5 Press (MENU).

The display returns to the normal display.

Note

Panorama size images cannot be stored. Only pre- stored panorama images are available.

Selecting the aspect ratio— Aspect

You can deform or clip out images to fit the screen size with the aspect ratio selected.

1 Press (MENU).

2 Press < or , repeatedly to select “Display,” then press (ENTER).

3 Press < or , repeatedly to select “Aspect,” then press (ENTER).4 Press < or , repeatedly to select the desired image mode.

Each time you press < or ,, the image type changes as follows:

When “Video full” or “Video & Spectrum Analyser” is selected.

Standard2 y Standard1 y Wide2 y Wide1 y Cinema2 y Cinema1

When “Video & Capture” or “Video & Slideshow” is selected.

Standard3 y Wide3 y Cinema3

To adjust the image position

Cinema and Wide type images can be scrolled up or down by pressing or pressing and holding M or m.

22