Removing the unit1 Remove the protection collar.

1Engage the release keys together with the protection collar.

Orient the release key correctly.

2Pull out the release keys to remove the protection collar.2 Remove the unit.1Insert both release keys together until they click.

Face the hook inwards.

2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.
SpecificationsCD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range: 87.5 – 108.0 MHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3% (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz

LW: 153 – 279 kHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: MW: 30 µV, LW: 40 µV

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W ⋅ 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear)

Subwoofer output terminal (mono)

Power aerial relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Illumination control terminal

Parking brake input terminal

BUS control input terminal

BUS audio input/AUX IN terminal

Remote controller input terminal

Aerial input terminal

Video input terminal

Connection terminal:

Navigation control terminal (NV-BUS)

Tone controls:

Bass: ±8 dB at 100 Hz

Treble: ±8 dB at 10 kHz

Loudness:

+8 dB at 100 Hz

+2 dB at 10 kHz

Power requirements: 12 V DC car battery (negative earth)

Dimensions: Approx. 178 ⋅ 50 ⋅ 182 mm (w/h/d)

Mounting dimensions: Approx. 182 ⋅ 53 ⋅ 162 mm (w/h/d)

Mass: Approx. 1.6 kg

continue to next page t

37