Press (MENU).

Other Functions

Setting the custom function

— Custom

You can set one of desired functions to the CUSTOM button so as to perform the function easily.

The functions listed below are assignable: Screen - changes the display mode (page 11). AF - turns the AF function on or off (page 19). TA - turns the TA function on or off (page 19). Mode - changes the band number or playback unit.

ATT - attenuates the sound quickly (page 9). Capture - stores the image at the moment the shutter clicked (page 24).

Image - changes the display pattern of the display mode selected (page 11).

1

2 Press < or , repeatedly to select “Custom,” then press (ENTER).

3 Press < or , repeatedly to select the desired function to assign, then press (ENTER).

Each time you press < or ,, the function changes as follows:

Screen y AF y TA y Mode y ATT

yCapture y Image y Screen

4 Press (MENU).

The display returns to the normal display.

Tip

When the optional NVX-HC1 is connected, “Custom” is not displayed.

Initializing the unit

— Initialize

If you initialize the unit, all additionally stored images are erased, and the unit returns to the factory preset condition.

The items listed below are initialized. Setup (Contrast, Dimmer, Video,

Commander, Demo, Security),

Edit (Name Edit, Name Delete, Picture Delete, Opening),

Display (Skin, Char Color, Auto Image, Effect, Wallpaper, Panorama, Aspect, Auto Clear, Auto Scroll),

Custom, Brightness of the Video mode

1 Press (MENU).

2 Press < or , repeatedly to select “Setup,” then press (ENTER).

3 Press < or , repeatedly to select “Initialize,” then press (ENTER).

The confirmation display appears.

When the Code Input display appears Enter your security code, then press (ENTER) (page 30).

4 Press < or , repeatedly to select “YES,” then press (ENTER). “Complete” appears, then the display returns to the previous display.

To cancel initializing, press (MENU).

Notes

•Do not turn off the unit while initializing.

•Initialization takes time depending on the volume of images stored.

•Note that you cannot restore an image once you have initialized.

•You cannot delete the pre-stored images in this unit.

Setting the security code

— Security

This unit has a security function to discourage theft. Input a 4-digit number as your security code.

If you set it, you need to input the stored code to turn on the unit should you re-install the unit in another car or after changing the battery.

Operation by only the card remote commander:

1 Press (MENU).

2 Press < or , to select “Setup,” then press (ENTER).

3 Press < or , to select “Security,” then press (ENTER).

The Code Set display appears.

continue to next page t

29