Press (MENU).
Press (MENU).
Adjusting the front and rear volume— Balance/Fader

You can adjust the volume balance between right and left speakers (Balance), and front and rear speakers (Fader).

1 Press (SOURCE) to select a source (radio, CD, MD or AUX).

2

3 Press < or , repeatedly to select “Sound,” then press (ENTER).

4 Press < or , repeatedly to select

“Balance” or “Fader” then press (ENTER).

To adjust the balance between right and left speakers, select “Balance.”

To adjust the balance between front and rear speakers, select “Fader.”

5 Press < or , repeatedly to adjust the balance, then press (ENTER).

6 Press (MENU).

The display returns to the normal display.

Adjusting the subwoofer volume— Sub Woofer

1 Press (SOURCE) to select a source (radio, CD, MD or AUX).

2

3 Press < or , repeatedly to select “Sound,” then press (ENTER).

4 Press < or , repeatedly to select “Sub Woofer,” then press (ENTER).

5 Press < or , repeatedly to adjust the volume level, then press (ENTER).

The volume level is adjustable in 1 dB steps from –∞, –10 dB to +10 dB.

6 Press (MENU).

The display returns to the normal display.

Tip

“– ∞” appears when the volume level is below –10 dB.

Adjusting the cut-off frequency for the speakers and subwoofer(s)

— HPF/LPF (High pass filter/Low pass filter)

To match the tone range of the speakers and subwoofer(s), you can select the cut-off frequency.

Example: “78Hz” is selected for both “HPF” and “LPF.”

Level

 

 

 

 

 

 

 

 

 

 

Cut-off frequency

 

 

 

 

 

 

 

 

 

 

 

 

off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

78125

Frequency (Hz)

tone range of speakers

tone range of subwoofer(s)

1 Press (SOURCE) to select a source (radio, CD, MD or AUX).

2 Press (MENU).

3 Press < or , repeatedly to select “Sound,” then press (ENTER).

4 Press < or , repeatedly to select “HPF” or “LPF,” then press (ENTER).

5 Press < or , repeatedly to select the desired cut-off frequency, then press

(ENTER).

6 Press (MENU).

The display returns to the normal display.

To cancel the cut-off frequency, select “OFF” in Step 5.

Tips

•Select the same cut-off frequency for both “HPF” and “LPF.”

•“HPF” can be adjusted when the subwoofer is not

connected. Only low frequency signals are cut.

27