To select Enhanced Surround Mode

1Press AMP.

2Press MENU.

3Press V/v repeatedly to select

“<SURROUND>”, then press or b.

4Press V/v repeatedly to select

“<E.SUR MODE>”, then press or b.

5Press V/v repeatedly to select the Enhanced Surround Mode you want, then press .

Note

The selected Enhanced Surround Mode can only be applied if you have selected “E.SURROUND” by pressing A.F.D repeatedly.

Listening to the sound without any adjustment (ANALOG DIRECT)

Press 2CH/A.DIRECT repeatedly to select “A.DIRECT”.

Listening to the FM/AM radio

For details on the tuner function, see “Tuner Operations” (page 73).

Tuning radio stations

1Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2Press TUNING + or TUNING –.

Press TUNING + to scan from low to high frequencies, press TUNING – to scan from high to low frequencies. The receiver stops scanning whenever a station is received.

You can also press TUNING MODE on the receiver to select “AUTO” and then turn TUNING +/– to select stations.

Selecting a frequency directly (Direct Tuning)

1After selecting the FM or AM band, press D.TUNING.

2Press SHIFT, then press numeric buttons to enter the frequency.

3Press .

Presetting radio stations

1 Tune in the station that you want to preset.

For details on the operation, refer to “Tuning radio stations”.

2 Press SHIFT, then press ENT/ MEM.

You can also use MEMORY/ENTER on the receiver.

“MEM” lights up for a few seconds. Perform steps 3 and 4 before “MEM” disappears.

3 Press PRESET + or PRESET – to select a preset number.

30 FM and 30 AM preset numbers are

 

available. If “MEM” disappears before

Other

from step 2.

you select the preset number, start again

Operations

4 Press ENT/MEM.

 

If SHIFT indicator is light off before you

 

press ENT/MEM, press SHIFT.

 

You can also use MEMORY/ENTER on

 

the receiver. The station is stored as the

 

selected preset number.

 

If “MEM” disappears before you press

 

ENT/MEM, start again from step 2.

 

5 Repeat steps 1 to 4 to preset

 

another station.

 

continued

115US