xSW Level (Subwoofer level for HDMI)

Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently.

•AUTO

The subwoofer level is automatically set to 0 dB or +10 dB depending on the sampling frequency.

•+10 dB

•0 dB

Settings for the system

(System settings menu)

You can use the System settings menu to customize the settings of the receiver. Select “System” in the Settings menus. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 39).

System settings menu parameters

xRS-232C Control

• ON

The receiver can receive commands from the RS-232C port.

• OFF

The receiver does not receive commands from the RS-232C port.

58US