HDMI

The source sound input to the HDMI jack is not output from the receiver or the TV speaker.

Check the setting of “Audio Out” in the HDMI settings menu (page 57).

Check that the component is connected correctly to the HDMI jack for that component.

You cannot listen to the Super Audio CD by connecting HDMI.

Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

Be sure to use a connecting cable for the HDMI jack corresponding to high speed (an HDMI version 1.3a, category 2 cable) when you view images or listen to sound during a Deep Color transmission.

The source image input to the HDMI jack is not output from the TV.

Check the HDMI connection (page 26).

Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with the each component.

Be sure to use a connecting cable for the HDMI jack corresponding to high speed (an HDMI version 1.3a, category 2 cable) when you view images or listen to sound during a Deep Color transmission.

The Control for HDMI function does not work.

Check the HDMI connection (page 26).

Make sure “Control for HDMI” is set to “ON” in the HDMI menu.

Make sure the connected component is compatible with the Control for HDMI function.

Check the Control for HDMI settings on the connected component. Refer to the operating instructions of the connected component.

If you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure, repeat the procedures of “Preparing Control for HDMI function” (page 89).

No sound is output from the receiver and TV speaker while using the System Audio Control function.

Make sure the TV is compatible with the System Audio Control function.

If the TV does not have System Audio Control function, set the “Audio Out” settings in HDMI menu to

“TV+AMP” if you want to listen to the sound from the TV speaker and receiver.

“AMP” if you want to listen to the sound from the receiver.

If you cannot listen to the sound of a component connected to the receiver

Change the input of the receiver to HDMI when you want to watch a program on a component connected via HDMI connection to the receiver.

Change the TV channel when you want to watch a TV broadcast.

Select the component or input you want to watch when you watch a program on the component connected to the TV.

Refer to the operating instructions of the TV on this operation.

132US