Performing Auto Calibration

The Auto Calibration function allows you to measure the following:

•Speaker connectionsa)

•Speaker polarity

•Speaker distancea)

•Speaker sizea)

•Speaker level

•Frequency characteristicsa)b)

a)The measurement result is not utilized in the following cases.

–The multi channel input is selected. –“Analog Direct” is being used.

b)The measurement result is not utilized in the following cases.

–Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received.

–PCM signals with a sampling frequency of more than 96 kHz are being received.

2CH/

A.DIRECT A.F.D. MOVIE MUSIC

INPUT

NIGHT

RESOLUTION MODE

SLEEP MODE

GUI

MODE1

2-5

HOME

MENU

CATEGORY

1 Press GUI MODE to select “GUI ON”.

“GUI MODE” appears on the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.

2 Press V/v repeatedly to select “Settings”, then press or b.

The Settings menu list appears on the TV screen.

3 Press V/v repeatedly to select “Auto Calibration”, then press or b.

4 Press V/v repeatedly to select “Auto Calibration Start”, then press or b.

5 Press to select “START”.

6 The measurement starts in five seconds.

7 Measurement starts.

The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes.

Tip

The measurements may not be performed correctly or Auto Calibration cannot be performed when special speakers, such as dipole speakers are used.

46US