Sony 3-289-204-12(1) Adjusting the equalizer

xD.Range Comp

(Dynamic range compressor)

Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only.

•MAX

The dynamic range is compressed dramatically.

•STD

The dynamic range is compressed as intended by the recording engineer.

•AUTO

The dynamic range is applied automatically with Dolby TrueHD source or other source is set to “OFF”.

•OFF

The dynamic range is not compressed.

Tips

•Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal.

•“STD” is the standard setting, but it only enacts light compression. Therefore, we recommend using the “MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.

xDistance Unit (Distance unit)

Lets you select the unit of measure for setting distances.

• METER

The distance is displayed in meters.

• FEET

The distance is displayed in feet.

Adjusting the equalizer

You can use following parameters to adjust the tonal quality (bass/treble level) of all speakers, and apply them. These settings are applied to all sound fields and for each speaker.

Bass

Treble

Level (dB)

Frequency (Hz)

Notes

•This function does not work in the following cases.

–The multi channel input is selected.

–Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received.

–PCM signals with a sampling frequency of more than 96 kHz are being received.

•If the equalizer is adjusted while the receiver is receiving signals with a sampling frequency of more than 96 kHz, the signals will always be played back at 96 kHz.

2CH/	MOVIE	MUSIC
A.DIRECT A.F.D.
INPUT	SLEEP	NIGHT
RESOLUTION MODE		MODE

GUI

MODE1

2-5

OPTIONS

HOME