6 Press SHIFT, then press the numeric buttons to enter your
“The channel has been locked.” appears and the Parental Lock is set.
To delete the numbers you have entered, go back to step 4 by pressing RETURN/ EXIT O, and then repeat the procedure above from step 4.
To change the lock code1Press V/v repeatedly to select “SR”,
then press or b.
2Press OPTIONS, then press V/v to
select “Lock Code”, then press .
“Enter your
3Press SHIFT, then press the numeric buttons to enter your
“Enter a new lock code.” appears.
4Enter a new
“To confirm, enter your new lock code again.” appears.
5Reenter the new lock code with the numeric buttons.
“The lock code has been changed.” appears.
1Press V/v repeatedly to select “SR”,
then press or b.
2Select a locked channel you want to listen to using “Direct Tuning” (page 81).
“The channel is locked. Enter your
3Press SHIFT, then press the numeric buttons to enter your
The channel is tuned in.
To cancel the Parental Lock1Press V/v repeatedly to select “SR”,
then press or b.
2Tune in the channel you want to unlock using “Direct Tuning” (page 81).
3Press OPTIONS, then press V/v to
select “Parental Lock”, then press or b.
4Press V/v repeatedly to select “OFF”,
then press .
“Enter your
5Press SHIFT, then press the numeric buttons to enter your
“The channel has been unlocked.” appears and the channel is unlocked.
Notes
•When you select a channel using Category Tuning, locked channels are skipped.
•When the receiver is reset to the factory settings, the lock code returns to the default (0000), but the Parental Lock settings are not removed.
•You cannot preset locked channels. If you set the Parental Lock for a preset channel, the preset information for that channel returns to the default.
•You cannot set the Parental Lock for channel 0 or channel 184.
84US