Notes

•The sound fields for music and movies do not work in the following cases.

–The multi channel input is selected.

–DTS-HD signals with a sampling frequency of more than 48 kHz are being received.

–Dolby TrueHD signals with a sampling frequency of more than 48 kHz are being received.

–Signals with a sampling frequency of more than 48 kHz are being received.

–The multi channel PCM signals are received via a HDMI IN jack.

•When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to “LARGE” in the Speaker settings menu.

However, the sound will be output from the subwoofer if

–the digital input signal contains LFE signals.

–the front and surround speakers are set to “SMALL”.

–the sound field for movie is selected.

–“Portable Audio” is selected.

Tips

•You can identify the encoding format of DVD software, etc., by looking at the logo on the package.

•Sound fields with DCSmarks use DCS technology. See “Glossary” (page 125).

•When the sound field’s DCSmark is selected, the Digital Cinema Sound lamp lights up on the display.

To turn off the surround effect for MOVIE/MUSIC

Select “2ch Stereo” or “A.F.D. Auto” in the Surround settings menu.

Resetting sound fields to the initial settings

Be sure to use the buttons on the receiver for this operation.

1,2

2

1 Press POWER to turn off the receiver.

2 While holding down MUSIC, press POWER.

“S.F. CLEAR” appears on the display and all sound fields are reset to their initial setting.

Sound Surround Enjoying

65US