AR-B1570 User’s Guide
5.7 INTEGRATED PERIPHERALS
This section is designed to configure the peripheral features.
| ROM PCI/ISA BIOS (2A434AVF) |
|
| ||
| INTEGRATED PERIPHERALS |
|
| ||
| AWARD SOFTWARE, INC. |
|
| ||
IDE HDD Block Mode | : Enabled |
|
|
|
|
Primary IDE Channel | : Enabled |
|
|
|
|
Master Drive PIO Mode | : Auto |
|
|
|
|
Slave Drive PIO Mode | : Auto |
|
|
|
|
IDE Primary Master UDMA | : Disabled |
|
|
|
|
IDE Primary Slave UDMA | : Disabled |
|
|
|
|
KBC input clock | : 8 MHz |
|
| : |
|
| : 3F8/IRQ4 |
|
|
| |
Onboard Serial Port 1 | Multiple Monitor Support | : No Onboard |
| ||
Onboard Serial Port 2 | : 2F8/IRQ3 |
|
|
|
|
Onboard IR Controller | : Disabled | Video Memory Size | : 2.5M |
| |
|
|
|
|
|
|
|
| Esc: | Quit | ↑↓→←: | Select Item |
|
| F1: | Help | Modify | |
Onboard Parallel Port | 378/IRQ7 | F5: | Old Values | (Shift) F2: | Color |
F6: | Load BIOS Defaults |
|
| ||
Parallel Port Mode | SPP | F7: | Load Setup Defaults |
|
|
Integrated Peripherals
IDE HDD Block Mode
This option allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive (HDD).
Enabled | IDE controller uses block mode. |
Disabled | IDE controller uses standard mode. |
IDE PIO
IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship, which is determined by the cabling configuration used to attach them to the controller. Your system supports one IDE controller – a primary and a secondary – so you have the ability to install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than have the BIOS issue a series of commands effect a transferring to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by them. This is simpler and more efficient (and faster). Your system supports five modes, numbered from 0 to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode.
KBC input clock
This item it to chose the input clock of Keyboard Controller
OnBoard Serial Port 1 & 2
These options are used to select the port address of the
The options are 3F8H, 2F8H, Port four can be set to be IrDA
OnBoard Parallel Port
This option is used to select the port address of the
Parallel Port Mode
This option specifies the parallel port Mode. The settings are Printer or Extended
35
