Sony CDP-CX90ES 20EN, Checking the programmed order, Changing the programmed order, You need to

Playing CDs

3Press the number button of the disc.

PROGRAM1	DISC
	2O
CD2
*DISC-2O*

DISC-[ 2O]

4To program a whole disc, skip this step and go to Step 6. Press TRACK/SPACE.

PROGRAM1	DISC
	2O
CD2
*DISC-2O*

TRACK-[ _]

5Press the number button of the track.

PROGRAM1	DISC
	2O
CD2

*DISC-2O* TRACK-[ 3]

6Press ENTER.

The track being programmed

	PROGRAM1								DISC
									2O
	CD2
		*DISC				-2O*
			DISC	TRACK				STEP
		2O			3		1
The disc
			being				Playing order
programmed

7To program other discs/tracks, do the following:

To program	Repeat Steps
Other discs	2, 3 and 6
Other tracks on the same disc	4 through 6
Other tracks on other discs	2 through 6

8Press áto start Program Play.

To cancel Program Play

Press CONTINUE.

Checking the programmed order

You can check your program before or after you start playing.

Press CHECK.

Each time you press this button, the front panel display shows the disc and track numbers of each step in the programmed order. (When a whole disc is programmed as one step, “ALL” appears instead of the track number.) After the last step in the program, the front panel display shows “END” and returns to the original display.

Changing the programmed order

You can change your program before you start playing.

To	You need to
Erase a track or disc	Press CHECK until the track or
	disc you do not want appears in
	the front panel display, then press
	CLEAR
Erase the last track or	Press CLEAR. Each time you
disc in the program	press the button, the last track or
	disc will be cleared.
Add tracks or discs to the	Follow the programming
end of the program	procedure
Change the whole	Hold down CLEAR until “ALL
program completely	CLEAR” appears in the front
	panel display to erase the whole
	program, then create a new
	program following the
	programming procedure

Erasing the programs stored in memory

1Press PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the front panel display.

2Hold down CLEAR until ”ALL CLEAR” appears in the front panel display.

20EN