Sony CMT-SP55TC Playing a tape, Recording a CD on a tape (continued)

Recording a CD on a tape (continued)

6 Press S on the tape deck.

Recording starts.

When the recording is completed, the CD player and the tape deck stop automatically.

To	Do this
Stop recording	Press s on the tape deck or CD
	player.
Remove the	Press A on the tape deck and CD
tape and CD	player in stop mode.

Tips

•When you want to record on the reverse side, press hon the tape deck in step 5.

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•If you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side.

•When you want to reduce the hiss noise in high- frequency signals recorded at low level, press DOLBY NR after step 5 so “DOLBY NR” appears in the display. Turning DOLBY NR on reduces the noise when playing back these types of signals.

Playing a tape

You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal), since the tape deck automatically detects the tape type (ATS*).

To turn on the system, press ?/1 (power).

?/1 (power) 2

DOLBY NR** 3 4 1

*ATS: Automatic Tape Selection

**This tape deck is equipped with the Dolby B-type noise reduction system.

18