To tune in a station with a weak signal

1Press TUNING MODE repeatedly until “MANUAL” appears in step 3.

2Press m or M repeatedly to tune in the station and continue from step 5.

To set another station to the exist preset number

Start over from step 2.

To change the AM tuning interval (except for the European model)

The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding down the TUNING + button, turn the system back on. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Tips

•When a new station is memorized, the station formerly memorized at that preset number is erased.

•The preset stations are retained for about a week even if you disconnect the mains lead or if a power failure occurs.

Listening to the radio

— Preset Tuning

Preset radio stations in the tuner’s memory first (see page 24).

To turn on the system, press ?/1 (power).

 

`/1

 

?/1 (power)

2

Tuner

 

3

3

1

 

1 Press BAND TUNER repeatedly to select “AM” or “FM”.

2 Press TUNING MODE repeatedly until “PRESET” appears.

continued

25