Listening to the radio (continued)
3 Press .or > to select the desired preset station.
Preset number and frequency (or station name* or RDS station name**)
*The station name appears only if you have labelled the station (see page 27).
**European model only.
To | Do this |
Turn off the radio | Press ?/1 to turn off the |
| system. |
|
|
Adjust the volume | Press VOLUME + or |
|
|
Listening to non-preset radio
stations
•Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press m or M to tune in the desired station (Manual Tuning).
•Press TUNING MODE repeatedly until “AUTO” appears in step 2, then press m or M. The frequency indication changes and the scanning stops when the system tunes in a station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE.
Tips
•You can switch from another source to the tuner just by pressing TUNER/BAND on the tuner (Automatic Source Selection).
•To improve broadcast reception, adjust the supplied aerials, or connect a commercially available external aerial (see page 36).
•When an FM stereo programme has static noise, press STEREO/MONO on the remote until “MONO” appears. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
26