Once you have finished the connections, you can rearrange the components as desired.
Inserting two R6 (size AA)
batteries into the remote
TipWith normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
Notes
•If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
•Be sure to insert the batteries in correct direction.
•Do not mix a new battery with an old one.
•Do not use different types of batteries together.
•Do not use a battery that is leaking.
•If the battery leaks, clean the battery compartment and replace all the batteries with new ones.
Adjusting the contrast of the
characters in the display
All information for each component appears in the display on the tuner. While holding down DISPLAY, press TUNING + or – to adjust the contrast of the displayed characters. You can finely adjust the contrast in 7 steps from
Adjusting the brightness of
the display back light
Press DISPLAY in standby mode to light up the display back light. While the display is lit, press TUNING + or – to adjust the back light brightness.
Started Getting
7