To cancel the procedure

Press CLOCK/TIMER SET.

To change the setting

Start over from step 1.

To check the setting/activate the timer

Press CLOCK/TIMER SELECT and press . or > repeatedly until “SEL DAILY” appears. Then press ENTER/YES.

It is not necessary to set the start and stop times every time.

To cancel the timer

Press CLOCK/TIMER SELECT and press . or > repeatedly until “TIMER OFF” appears. Then press ENTER/YES.

Notes

•You cannot activate Daily Timer and recording timer at the same time.

•Do not operate the system from the time the system turns on until the play starts (about 30 seconds before the preset time).

•If the system is on at the preset time, the set sound source starts playing.

Timer recording radio programmes

To timer record, you must first preset the radio station (see page 24) and set the clock (see page 8). You can make a timer recording of a radio programme or the audio signal from a component connected to AUX IN (see page 35).

`/1

8

2 3–6

3–6 3–6

1 Prepare the sound source you want to play.

•Radio: Tune in the preset radio station (see page 25).

•AUX: Set the timer of the component connected to AUX IN. For details, refer to the operating instructions of the connected component.

2 Press CLOCK/TIMER SET.

3 Press . or > repeatedly until “SET TAPE REC” (or “SET MD REC” when using the optional MD deck MDS-SP55) appears, then press ENTER/YES.

The hour indication flashes.

continued

Features Timer/Other

31