Step 2: Setting the time

You must set the time beforehand to use the timer functions.

The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system is used for illustration purposes.

Set the time before turning on the system.

`/1

1 2,3

2,3 2,3

1 Press CLOCK/TIMER SET while the system is off.

The hour indication flashes.

2 Press . or > to set the hour, then press ENTER/YES.

The minute indication flashes.

3 Press . or > to set the minute, then press ENTER/YES.

The clock starts.

If you made a mistake

Start over from step 1.

To change the preset time

You can change the preset time while the system is on.

1Press CLOCK/TIMER SET.

2Press .or > repeatedly until “SET CLOCK” appears, then press ENTER/YES.

3Repeat steps 2 and 3.

Tips

•The built-in clock shows the time in the display while the system is off. If you press DISPLAY at this time, the display back light lights up, making the clock easier to see.

•The upper dot of the colon flashes for the first 30 seconds, and the lower dot flashes for the last 30 seconds of each minute.

8