Stack the components vertically in the order shown in the illustration below.
Tuner
Amplifier
CD player
Tape deck
1 Connect the system cables to the |
SYSTEM CONTROL connectors on |
Connect the supplied system cable to the SYSTEM CONTROL 2 (black) connectors on the tuner and on the CD player.
Connect the tuner and tape deckConnect the supplied system cable to the SYSTEM CONTROL 3 (red) connectors on the tuner and on the tape deck.
Notes•The system cable is used to send signals and electricity between the components for interlinked operation.
Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly.
•Keep the system cable away from the aerials to prevent noise or malfunction.
2Connect the speakers.
Connect the speaker cords to the SPEAKER terminals on the amplifier and to the terminals on the speakers as shown below.
each component. |
Connect the tuner and |
amplifier |
Connect the system cable on the amplifier to |
the SYSTEM CONTROL 1 (white) |
connector on the tuner. |
Red line (3)
R |
|
+ |
|
L | + |
| |
– |
|
– |
|
SYSTEM | CONTROL 1 |
|
SYSTEM | CONTROL 1 |
|
Clear (#)
Insert this portion
continued5