3 Press TUNING MODE repeatedly until “PRESET” appears.
4 Press TUNING + or – to select the desired preset station.
To preset radio stations, see page 24.
Preset number and frequency (or station name* or RDS station name**)
*The station name appears only if you have labelled the station (see page 27).
**European model only.
5 Press zREC.
The z REC indicator lights up.
The tape deck stands by for recording.
6 Press Hon the tape deck to record starting from the front side.
To record from the reverse side, press
hon the tape deck.
7 Press DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides.
If you select both sides recording and the tape reaches the end of the front side part- way through a track, the entire track is recorded again from the beginning of the reverse side. When you start recording from the reverse side, the recording stops at the end of the reverse side even though you select h.
8 Press Son the tape deck.
Recording starts.
To | Do this |
Stop recording | Press son the tape deck. |
|
|
Pause | Press Son the tape deck. |
| Press Sagain or H on the |
| tape deck to restart recording. |
|
|
Remove the tape | Press Aon the tape deck in |
| stop mode. |
|
|
Tips
•If noise is heard while recording an AM radio programme, move the AM loop aerial to reduce the noise or connect a ground wire to the Uterminal (see page 36).
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•When you want to reduce the hiss noise in high- frequency signals recorded at low level, press DOLBY NR after step 7 so “DOLBY NR” appears in the display. Turning DOLBY NR on reduces the noise when playing back these types of signals.
Deck Tape The
23