Labelling the preset stations (continued)
8 Repeat steps 5 to 7 to complete the entire title.
If you made a mistake
Press CURSORT or t until the character you want to change flashes, then repeat steps 5 to 7.
To erase a character
Press CURSORT or t until the character you want to erase flashes, then press
CLEAR.
9 Press ENTER/YES to complete the labelling procedure.
To cancel labelling
Press MENU/NO before completing the procedure.
To check the station name
Press DISPLAY.
Each time you press the button, the display changes as follows:
tStation name* r
The preset number and the frequency
r
Clock display
*When the station is not labelled, the preset number and the frequency are displayed automatically.
To erase the name
Do steps 1 to 4 and press CLEAR repeatedly until the label disappears, then press ENTER/YES.
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular programme signal. RDS is available only on FM stations*.
Note
RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak.
*Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
Receiving RDS broadcasts
,Simply select a station from the FM band.
When you tune in a station that provides RDS services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY, the display changes as follows:
tStation name* r
Frequency
r
Clock display
*If the RDS broadcast is not received, the station name may not appear in the display.
28