Getting Started

Automatically Adjusting the Picture

If the picture is flickering or fuzzy, press the AUTO button. The monitor is automatically adjusted to match the signal from the connected computer.

Further fine adjustments may be needed with some computers. In this case, manually adjust the monitor by referring to “Customizing Your Monitor” on page 9.

Selecting the On-Screen Display Language

You can select the OSD language from English, French, German, Spanish, Italian, and Japanese.

1Press the MENU button.The MENU OSD appears.

MENU

MENU OKMENU

1Turn on the monitor.2Turn on the computer.3Press the AUTO button.The picture is adjusted to fit the center of the screen.

AUTO

Notes

•This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MS-DOS prompt).

•The screen may go blank for a few seconds while performing the auto-sizing function. This is not a malfunction.

If the picture is flickering or fuzzy even after you press the AUTO button

Adjust the Pitch and Phase manually (page 11).

EXIT

PHASE

PITCH

CENTER

ZOOM

COLOR

LANGUAGE

OPTION

2Press the ø /‡ buttons to select LANGUAGE, and press the MENU button.The LANGUAGE OSD appears.

LANGUAGE

MENU

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

œ { Œ

3Press the ø /‡ buttons to select the desired language, and press the MENU button.

The MENU OSD of the selected language appears.

MENU OKMENU

MENU

EXIT

PHASE

PITCH

CENTER

ZOOM

COLOR

LANGUAGE

OPTION

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

8