Customizing Your Monitor
Adjusting the Backlight
If the screen is too bright when you are using the monitor in
Setting the Power Saving Delay Time
a dark room, adjust the backlight.
1Press the MENU button.
The MENU OSD appears.
MENU
MENU OK
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM
COLOR
LANGUAGE
OPTION
You can set the delay time before the monitor enters the power saving mode. See page 17 for more information on this monitor’s power saving capabilities.
1Press the MENU button.
The MENU OSD appears. | MENU | OK MENU |
MENU | EXIT |
|
PHASE |
| |
| PITCH |
|
| CENTER | |
| ZOOM |
|
| COLOR |
|
| LANGUAGE | |
2Press the ø /‡ buttons to select OPTION, and press the MENU button again.
The OPTION OSD appears.
OPTION | |
MENU |
|
: | 1M |
: UNLOCK | |
OSD H POSITION | |
3 Press the ø /‡ buttons to select | (BACKLIGHT). |
OPTION | |
| 26 |
: UNLOCK | |
BACKLIGHT | |
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
OPTION |
2Press the ø /‡ buttons to select OPTION, and press the MENU button again.
The OPTION OSD appears.
OPTION
MENU
: 1M
: UNLOCK
OSD H POSITION
3Press the ø /‡ buttons to select
ZZ... (PWR SAVE| DELAY). | OPTION |
| |
| 60MIN |
| 1MIN |
| 5SEC |
| OFF |
| PWR SAVE DELAY |
When PWR SAVE DELAY is set to OFF, the monitor does not go into power saving mode.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
14