Customizing Your Monitor
Adjusting the Picture Position
If the picture is not in the center of the screen, press the AUTO button. If this operation does not work, adjust the centering as follows.
Once the centering is adjusted, it will be stored in memory for the current input signal.
1 Load the Utility Disk (page 10). |
|
| |
2 Press the MENU button. | MENU | OK MENU | |
The MENU OSD appears. | |||
|
| ||
| EXIT |
| |
MENU | PHASE |
| |
| PITCH |
| |
| CENTER | ||
| ZOOM |
| |
| COLOR |
|
The CENTER OSD appears.
CENTER
MENU
Displaying the Picture at the Actual Resolution
The monitor is set at the factory to display the picture on the screen in full, irrespective of the picture’s resolution. You can also view the picture at its actual resolution.
Once the zoom is set, it will be stored in memory for the current input signal.
1Press the MENU button.
The MENU OSD appears. | MENU | OK MENU |
|
| |
| EXIT |
|
MENU | PHASE |
|
| PITCH |
|
| CENTER | |
| ZOOM |
|
| COLOR |
|
| LANGUAGE | |
| OPTION |
|
MENU button again.
The ZOOM OSD appears.
H
V
26
MENU
ZOOM
FULL MODE REAL MODE
4For horizontal adjustment, select H using the ø /‡ buttons and adjust the position using the +/– buttons.
+ . . . to move the picture right |
|
CENTER | |
| H |
| V |
| 26 |
For vertical adjustment, select V using the ø /‡ buttons and adjust the position using the +/–
buttons. |
|
+ . . . to move the picture up | CENTER |
| |
| H |
| V |
| 26 |
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
To turn off the test pattern, click [END]on the screen.
The MENU OSD appears.
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
To display the picture on the screen in full
Press the ø button in step 3 to select FULL MODE.
12