Sony CPD-L133 Eliminating Flickering or Blurring, MENU button again, MENU button again, 2Press the MENU button, 5Press the MENU button, 1Load the Utility Disk (page 10)

Eliminating Flickering or Blurring

If a part of the screen is flickering or blurring, press the AUTO button. If this operation does not work, adjust the Pitch and Phase as follows.

Once the pitch and phase are adjusted, they will be stored in memory for the current input signal.

Customizing Your Monitor

6Press the ø /‡ buttons to select PHASE, and press theMENU button again.

The PHASE OSD appears.

MENUPHASE

26

1Load the Utility Disk (page 10).2Press the MENU button.

The MENU OSD appears.

MENU

MENU OKMENU

EXIT

PHASE

PITCH

CENTER

ZOOM

COLOR

LANGUAGE

OPTION

7Press the +/– buttons until the screen color becomes uniform.

If you are using the Utility Disk, adjust until the horizontal stripes are at a minimum.

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

3Press the ø /‡ buttons to select PITCH, and press the

MENU button again.

The PITCH OSD appears.

PITCH

MENU

1328

4Press the +/– buttons until the screen color becomes uniform.

If you are using the Utility Disk, adjust so that the vertical stripes disappear.

5Press the MENU button.

The MENU OSD appears.

If horizontal stripes are observed over the entire screen, adjust the Phase in the next step.

To turn off the test pattern, click [END]on the screen.	EN
	F
	D
	ES
	I

11