zYou can turn on/off the power of the rear speakers using the switch on the lower side panel of each rear speaker. The indicator on each rear speaker changes as follows: subwoofer power on/data received (green); subwoofer power on/no data (blinks green); subwoofer power off (red).

Switch

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker jack or the bare wire of another speaker cord.

Examples of poor instllation of the speaker cords

 

Stripped speaker cord is

Stripped cords are touching

touching another speaker

each other due to excessive

terminal.

removal of insulation.

After connecting all the components, speakers, and the AC power cord, output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 34.

If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker other than the one currently displayed in the front panel display, the speaker may be short-circuited. If this happens, check the speaker connection again.

Note

Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords are reversed, the sound will be distorted and will lack bass.

continued

Started Getting

23GB