The left and right sounds are unbalanced or reversed.
,Check that the speakers and components are connected correctly and securely.
,Adjust the balance parameter in the BALANCE menu (pages 33).
Severe hum or noise is heard.
,Check that the speakers and components are connected securely.
,Check that the connecting cords are away from a transformer or motor, and at least
3 meters (10 feet) away from a TV set or fluorescent light.
,Move your TV away from the audio components.
,The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
,Clean the disc.
The sound loses stereo effect when
you play a VIDEO CD, or a CD.
,Set “AUDIO” to “STEREO” in the Control Menu display (page 51).
,Make sure you connect the system appropriately.
The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.
,Make sure the sound field function is on (page 53).
,Check the speaker connections and setting (pages 30).
,Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.
The sound comes from the center
speaker only.
,Depending on the disc, the sound may come from the center speaker only.
No sound is heard from the center
speaker.
,Check the speaker connections and settings.
,Make sure the sound field function is on (page 53).
,Select a sound field containing the word “cinema” (page 53).
No sound or only a very
sound is heard from the rear
speakers.
,Check the speaker connections and settings.
,Make sure the sound field function is on (page 53).
,Select a sound field containing the word “cinema” (page 53).
Operation
Radio stations cannot be tuned in.
,Check that the tuner is connected securely. Connect an external antenna if necessary.
,The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.
,No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations
(page 35).
The remote does not function. | Additional | |
| ||
, There are obstacles between the remote and |
| |
the system. |
| |
, The distance between the remote and the |
| |
system is too far. | Information | |
, The remote is not pointed at the remote | ||
| ||
sensor on the system. |
| |
, The solar battery is not charged enough |
| |
(page 19). |
| |
, The batteries in the remote are weak. |
| |
|
| |
The remote does not function even |
| |
after the solar battery is charged in |
| |
the light of the room. |
|
,Press the RESET button on the upper rear side of the remote using a pointed object such as the tip of a mechanical pencil (page 19).
continued