xCOMPONENT OUT
This will change the type of signal output from the COMPONENT VIDEO OUTPUT jacks on the subwoofer. See page 79, 80 for more information about the different types.
INTERLACE Select this when you are connected to a standard (interlace format) TV.
PROGRESSIVE Select this when you have a TV that can accept progressive signals.
Notes
•Unless the COMPONENT VIDEO OUTPUT/ SCAN SELECT switch on the rear panel of the subwoofer is set to “SELECTABLE,” you cannot select the above setting.
•When “PROGRESSIVE” is selected in “SCREEN SETUP,” no signal is output from the MONITOR OUTPUT jacks.
•“PROGRESSIVE” does not work for PAL signals. Even if you set “COMPONENT OUT” to “PROGRESSIVE,” the output signal is automatically switched to interlace format for PAL signals.
Custom Settings (CUSTOM
SETUP)
Allows setting up Parental Control and other settings.
Select “CUSTOM SETUP” in the Setup Display. For details on using the display, see “Using the Setup Display” (page 69).
The default settings are underlined.
CUSTOM SETUP |
|
VCD COLOR SYSTEM |
|
PARENTAL CONTROL |
|
TRACK SELECTION | OFF |
2CH MODE PRO LOGIC | MOVIE |
AUDIO DRC | OFF |
xCOLOR SYSTEM for VIDEO CD
playback (Asian models and
Australian models only)
Select the color system when you play a
VIDEO CD.
AUTO | Outputs the video signal in the |
| system of the disc, either PAL or |
| NTSC. If your TV uses a DUAL |
| system, select AUTO. |
|
|
PAL | Changes the video signal of an |
| NTSC disc and output in the |
| PAL system. |
|
|
NTSC | Changes the video signal of a |
| PAL disc and outputs it in the |
| NTSC system. |
Notes
•You cannot change the color system of the disc itself.
•On Asian models or Australian models, you can change the color system of this unit according to the connected TV. See page 28.
xPARENTAL CONTROL t (DVD only)
Sets a password and playback limitation level for DVDs with playback limitation for children. For details, see “Limiting playback for children (Parental Control)” (page 60).