xNORMAL SURROUND
Software with multi channel surround audio signals is played back according to the way it was recorded. Software with 2 channel audio signals is decoded with Dolby Pro Logic or Dolby Pro Logic II to create surround effects (page 73).
xDIGITAL CONCERT HALL A
Uses 3D sound imaging to reproduce the sound characteristics of the CONCERTGEBOUW in Amsterdam, which is famous for a large sound stage produced by reflectivity.
xDIGITAL CONCERT HALL B
Uses 3D sound imaging to reproduce the sound characteristics of the MUSIKVEREIN in Vienna, which is famous for its hall resonance and unique reverberative sound.
xJAZZ CLUB
Reproduces the acoustics of a jazz club.
xLIVE CONCERT
Reproduces the acoustics of a
xGAME
Obtains maximum audio impact from video game software.
xHEADPHONE THEATER
When you connect your headphones to the PHONES jack of the control unit, the HEADPHONE THEATER mode allows you to experience a theater like environment while listening through a pair of headphones. This mode is very effective with 5.1 ch discrete signal sources like Dolby Digital and DTS. Selecting any Sound Field (except AUTO DECODING or 2CHANNEL STEREO) enables the mode.
xHEADPHONE 2CH
When you connect your headphones to the PHONES jack of the control unit, and the SOUND FIELD is set to AUTO DECODING or 2CHANNEL STEREO, HEADPHONE 2CH is automatically activated.
Each time you press SOUND FIELD
x2CHANNEL STEREO [XX kHz]
(XX is a number) |
| |
When the sampling frequency of the input |
| |
signal is set to 88 [kHz]/96 [kHz], |
| |
2CHANNEL STEREO [88 kHz] or |
| |
| ||
2CHANNEL STEREO [96 kHz] is |
| |
automatically activated. | Sound | |
To check the sound field | ||
| ||
Press DISPLAY. | Adjustments | |
If the system mode is set to “VIDEO1” or | ||
The sound field appears on the TV screen, |
| |
and the sound field number appears in the |
| |
front panel display. The sound field on the |
| |
TV screen turns off in a few seconds. |
| |
“VIDEO2,” the TV screen momentarily |
| |
changes. |
| |
To turn the surround effect off |
| |
Press SOUND FIELD +/– on the remote |
| |
repeatedly until “S.F 1” or “S.F 11” |
| |
appears in the front panel display. |
| |
If the system mode is set to anything except |
| |
“VIDEO1” or “VIDEO2,” each time you |
| |
press SOUND FIELD |
| |
DECODING” or “2CHANNEL STEREO” |
| |
momentarily appears on the TV screen. |
|
continued