Step 1 Preparing the power supply
Recording time
|
| Recording with |
| Recording with |
| ||||
Battery pack |
| the viewfinder |
|
| the LCD screen |
|
| ||
| Continuous* | Typical** | Continuous* | Typical** | Getting | ||||
80 | (70) | 40 | (35) | 60 | (50) | 30 (25) |
| ||
|
| ||||||||
(supplied) |
|
| |||||||
|
|
|
|
|
|
|
|
| |
170 | (155) | 85 | (75) | 130 | (115) | 65 (55) |
| started | |
260 | (235) | 130 | (115) | 200 | (180) | 100 (90) |
| ||
|
| ||||||||
60 | (55) | 30 | (25) | 50 | (45) | 25 (20) |
|
| |
135 | (120) | 65 | (60) | 100 (90) | 50 (45) |
|
| ||
195 | (175) | 95 | (85) | 150 | (135) | 75 (65) |
|
| |
Approximate number of minutes when you use a fully charged battery |
|
|
| ||||||
Numbers in parentheses “( | )” indicate the time when using a normally charged |
| |||||||
battery. |
|
|
|
|
|
|
|
|
|
*Approximate continuous recording time at 77°F (25°C). The battery life will be shorter if you use your camcorder in a cold environment.
**Approximate number of minutes when recording while you repeat recording start/ stop, zooming and turning the power on/off. The actual battery life may be shorter.
Playing time
Battery pack |
| Playing time | Playing time | ||||
on LCD screen | with LCD closed | ||||||
| |||||||
| 60 | (55) | 85 | (75) |
| ||
| 135 | (125) | 185 | (165) |
| ||
| 210 | (190) | 280 | (250) |
| ||
| 50 | (45) | 65 | (60) |
| ||
| 110 (95) | 145 | (130) |
| |||
| 160 | (145) | 215 | (190) |
| ||
Approximate number of minutes when you use a fully charged battery | |||||||
Numbers in parentheses “( | )” indicate the time when using a normally charged | ||||||
battery. |
|
|
|
|
|
|
The battery life will be shorter if you use your camcorder in a cold environment.
Notes on the AC adaptor
•Attach the battery pack firmly.
•Charge the battery pack on a flat surface without vibration.
•Remove the supplied connecting cord
•The charging time may differ depending on the condition of the battery pack or the temperature of the environment.
•When a fully charged battery pack is installed, the CHARGE lamp will once light, then go out.
•If the CHARGE lamp does not light or flash, check that the battery pack is correctly attached to the AC adaptor. If it is not attached, it will not be charged.
•Prevent metallic objects from coming into contact with the metal parts of the connecting cord of the AC adaptor. This may cause a
•Keep the battery pack dry.
•When the battery pack is not to be used for a long time, charge the battery pack once fully, and then use it until it fully discharges again. Keep the battery pack in a cool place.
11