Maintenance information and precautions
Ajusting the LCD screen (CALIBRATION)
The buttons on the touch panel may not work correctly. If this happens, follow the procedure below.
(1) Set the POWER switch to OFF.
(2) Eject the tape from your camcorder, then disconnect any connecting cable from your camcorder.
(3) Set the POWER switch to VCR while pressing DISPLAY/TOUCH PANEL on your camcorder, then keep pressing DISPLAY/TOUCH PANEL for about five seconds.
(4) Follow the procedure below using an object such as the corner of the “Memory Stick” supplied with your camcorder.
1Touch | at the upper left corner. |
2Touch | at the lower right corner. |
3Touch | in the middle of the screen. |
| CALIBRATE |
| CALIBRATE |
| CALIBRATE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
If you do not press the right spot, always returns to the position at the upper left corner. In this case, start from step 4 again.
Information Additional
141