Recording video or TV programs
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With
(1)Insert a blank tape (or a tape you want to record over) into your camcorder, and insert the recorded tape into VCR.
(2)Set the POWER switch to VCR.
(3)Press MENU, then set DISPLAY in to LCD in the menu settings (p. 89). And press EXIT to return to FN.
(4)Press FN, then select PAGE3 (p. 16).
(5)Press REC CTRL.
(6)Press REC PAUSE.
(7)Press N on the VCR to start playback.
(8)Press REC START at the scene where you want to start recording.
5
PAGE1 PAGE2 PAGE3 EXIT
REC CTRL
4
DATA | REC |
CODE | CTRL |
REC CTRL
RET.FN
RECREC
PAUSE START
6 |
|
| 8 |
|
|
REC | REC |
| |||
|
|
|
| ||
| PAUSE |
|
| START |
|
|
|
|
|
|
|
DV | S VIDEO LANC |
DV IN/OUT
(not supplied)
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
74
In the step 6, press z REC and the button on its right simultaneously, then immediately press X. And in the step 8, press X at the scene where you want to start recording from.