Searching for a photo – Photo search/Photo scan
Searching for a photo without using cassette memory
(1) Set the POWER switch to VCR.
(2) Press FN to display PAGE1 (p. 16).
(3) Press MENU, then set CM SEARCH in 
to OFF in the menu settings (p. 89).
(4) Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN (5) Press . or > on the Remote Commander to select the photo for playback.
Each time you press . or >, your camcorder searches for the previous or next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x on the Remote Commander or on your camcorder.
In the 
mark
•The bar in the 
mark indicates the present point on the tape.
•The 
mark in the 
indicates the actual point you are trying to search.
If a tape has a blank portion between recorded portions
The photo search function may not work correctly.
The available number of photos that can be searched using the cassette memory The available number is up to 12 photos. However, you can search 13 photos or more using the scanning photo function.
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN (3) Press . or > on the Remote Commander.
Each photo is played back for about 5 seconds automatically.
2 |
| 1 POWER LOCK | |
SEARCH |
|
|
|
MODE | PHOTO 00 | VCR |
|
| SCAN |
| |
|
| CAMERA OFF | MEMORY |
3
Operations Playback Advanced
To stop scanning
Press x on the Remote Commander or on your camcorder.
57