Preventing accidental erasure
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the right (unlock) position.
(2) Press INDEX on your camcorder or the Remote Commander to display the index.
(3) Press “- MARK.” The screen to protect the image appears.
(4) Press the image you want to protect. The
2 |
|
|
| 1 | POWER | LOCK | |
|
|
| LOCK | ||||
INDEX |
|
|
|
| VCR |
|
|
|
|
|
|
| CAMERA OFF | MEMORY |
|
3,4 | MARK DEL | EXIT | RET | EXIT | |||
| 1 | 2 | 3 | 1 | - | 2 | 3 |
4 | 5 | 6 | 4 |
| 5 | 6 | |
| T | 1 / 40 | t | T |
| 2 / 40 | t |
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4. The
Note
Formatting erases all information on the “Memory Stick”, including the protected image data. Check the contents of the “Memory Stick” before formatting.
If the
You cannot carry out image protection.
operations Stick” “Memory
119