Playing back a tape
30
To change the playback direction
Press on the Remote Commander during playback to reverse the playback direction. To resume normal playback, press N.
To locate a scene monitoring the picture (picture search)
Keep pressing | /m or | /M during playback. To resume normal playback, |
release the button. |
|
|
To monitor the
Keep pressing /m while rewinding or /M while advancing the tape. To resume rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press y on the Remote Commander during playback. For slow playback in the reverse direction, press , then press y on the Remote Commander. To resume normal playback, press N.
To view the picture at double speed
Press ×2 on the Remote Commander during playback. For double speed playback in the reverse direction, press , then press ×2 on the Remote Commander. To resume normal playback, press N.
To view the picture
Press C on the Remote Commander in the playback pause mode. For
playback in the reverse direction, press c. To resume normal playback, press / N.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section plays back and stops.
Video control buttons
Marks on your camcorder are different from those on the Remote Commander supplied with your camcorder.
Your camcorder : 
, 
, 
Remote Commander : N, X, m, M
In the various playback modes
•Sound is muted.
•The previous picture may remain as a mosaic image during playback.
When the playback pause mode lasts for 5 minutes
Your camcorder automatically enters the stop mode. To resume playback, press 
/ N.
Slow playback
The slow playback can be performed smoothly on your camcorder; however, this function does not work for an output signal from the 
DV IN/OUT jack.
When you play back a tape in reverse
Horizontal noise appears at the center or top and bottom of the screen. This is not a malfunction.