Uniden DECT4086-4 manual Try…, Announce Only see page, cordless handsets to, I cant save a number

If…	Try…
	- Letting calls ring at least twice before answering.
No stations will	- Seeing if the call was placed through a
display any Caller ID	switchboard.
information.	- Checking with your telephone service provider to
	make sure your Caller ID service is active.
	- Making sure you entered the correct area code. If
I can't dial from the	you have to dial all 10 digits, you need to delete
Caller ID list.	the area code (see "Seven-digit Dialing" on page
	24).
Caller ID displays	- You may have to change the line mode. Contact
briefly and then
	customer service for more information.
clears.
I can’t transfer calls.	- Resetting all the handsets (see page 44).
I can’t get two	- Making sure both handsets are registered to this
	base.
cordless handsets to
	- Making sure no station is in Privacy Mode (see
talk to the caller.
	page 30).
The phone keeps	- You may have to change the line mode. Contact
ringing if I answer
	customer service for more information.
on an extension.
I can't save a number	- Seeing if the number is already in the phonebook.
to an existing	- Seeing if that entry already has two phone
phonebook entry.	numbers.
The answering	- Making sure the answering system is turned on.
system does not	- Making sure the base AC adapter is not plugged
work.	into an that's controlled by a wall switch.
The answering	- Making sure the Record Time is not set to
system won't record	Announce Only (see page 36).
messages.	- Deleting messages (the memory may be full).
A handset can't	- Making sure no other handset is using the system.
access the
	- Making sure the phone is in standby.
answering system.
My outgoing	- Seeing if there was a power failure. You may have
message is gone.	to re-record your personal outgoing message.

41