Manuals / Uniden / Communications / Cordless Telephone

Uniden DECT4086-2, DECT4086-4, DECT4086-3, DECT4086-5, DECT4086-6 manual Charge the battery, Try

Models: DECT4086-5 DECT4086-3 DECT4086-4 DECT4086-6 DECT4086-2 DECT4086

1 52

Download 52 pages 6.35 Kb

Page 6

Charge the battery

1. If your phone came with any

accessory handsets and chargers, connect a charger AC

adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)

2. Plug the other end of the adapter into a standard 120V

AC power outlet.

3. Place one handset in the base

and any other handsets in a charger with the displays facing forward. (It doesn't matter which handset you place in the base.) The charge lights on the base and all chargers should turn on.

If...	Try...

a charge	- reseating the handset.
light doesn't	- checking the AC adapter connection.
turn on	- seeing if the outlet is controlled by a wall switch.

Charge all handsets completely (about 15 hours) before using them.

Image 6

Uniden DECT4086-2, DECT4086-4, DECT4086-3, DECT4086-5, DECT4086-6 manual Charge the battery, Try

Contents

You might also find DECT4086 Series Users GuideWhats in the box? Phone Number Important Safety Instructions Whats in the manual? Installing Your Phone Set Up the BaseAttach the stand Connect the power and telephone cords Here rst Setup the Handsets Install the batteryPlace the phone on the wall Charge the battery Try Unavailable Test the ConnectionTest Line Check or Changing from Tone to Pulse Dialing Getting to Know Your Phone Parts of the BaseBase keys and how they work Standby or during a call open the Caller ID list Increase the speaker volumeKey name During text entry move the cursor to the right Parts of the Handset Handset keys and how they work Switch a normal call to the speakerphone and back Standby page another station using the intercomStandby open the redial list On the handset Reading the DisplaysOn the base Base Icon Handset Icon What it means Answering system status icons Answering system is off it will not answer the phone Soft keys in the main menu Using the Soft KeysSoft keys with the phone in standby On the base Common soft key descriptions Entering Text on Your Phone Using the Menus To close the menu Menu option Use it to Menu option Use it to Display. Enter any name up to 10 characters Special Feature Menus Using Your Phone Working with Two LinesAssigning a primary line Conferencing two lines together Change When On the base On a handset Changing the VolumeUsing the Caller ID and Redial Lists Medium, or High Caller ID and redial menu options Using the listsDialing from the CID or redial list Store into PB Using Seven-Digit Dialing Using Call Waiting Using an Optional Headset Finding a Lost Handset Creating a new entry Using the PhonebookSetting Up Your Phonebook Edit Name Editing an existing entry Chain Dialing One accessory handset to use this multi-station featurePhonebook Menu Options Copy All Using Multi-station Features Using Multi-Station Conference CallingExpanding Your Phone Using Privacy Mode Using Call TransferFrom the base From a handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Do Not Disturb Setting an alarm When an alarm rings Tuesday Using Voice Message Notification Resetting the voice message indicator Switch between the pre-recorded greeting and your greeting Using the Answering SystemSetting Up Your Answering System Recording your outgoing message Your new messages. To mute the alert without listening Ans. Setup menu optionsDelete your greeting To your messages, press any key on the base Icon Command Name Handset key Base key Accessing your system from a handset remote operationHow to operate your answering system Getting Your Messages Screening Your Calls Dialing in to your system Using the System While Youre Away from HomeProgramming a security code Remember to make a note of your new security code Solving Problems If… Try…Says Unavailable Announce Only see Weak or Hard To Hear Audio Noise or Static onO The lLine Status and keep the battery charged Here are some hints for when the static isHandset Setup , then select T-coil On 1 handset or in 1 location Do you have the base the handset is registered to? Yes Resetting and Registering HandsetsRegistering a handset Does the handset fit in the base cradle? Yes Handling Liquid Damage Handset Base PS-0034 PS-0035 Important InformationBase Charger 120V AC, 60 Hz Compliance Information FCC Part 15 information FCC Part 15.105b RF exposure information Terminal equipment Radio equipment 574,727 581,598 606,598 650,790 660,269 663,981 671,248