Uniden DECT4086-2 Changing the Volume, Using the Caller ID and Redial Lists, Change the, When

Changing the Volume

You can set the volume of the ringer and speaker separately for the base and each handset; you can also set the earpiece volume on each handset. The available volume levels and how to change them are listed below; for each item, press Up to make it louder or Down to make it softer.

Change the	When	On the base	On a handset
ringer volume	the phone is in	select a line, then select Off, Low,
	standby	Medium, or High
	you are on a		choose one of 6
earpiece volume		Not available	volume levels for
	normal call
			the active line
	you use the	choose one of 10	choose one of 6
	speaker-phone
speaker volume		volume levels for	volume levels for
	for a call or
		the active line	the active line
	getting messages

Using the Caller ID and Redial Lists

You have to subscribe to Caller ID to use Caller ID features: contact your telephone provider for more information.

Caller ID list information	Redial list information
- When a call comes in, the phone displays the	- Each station has its
caller’s number and name (if available) along	own redial list.
with which line is receiving the call.	- The redial list contains
- The phone saves the information for the last 50	the last 10 phone
calls received on either line to the CID list. The	numbers dialed from
phone records which line the call came in on.	that station.
- When it's in standby, each station displays the	- The redial list does
total number of calls received on both lines	not record which line
since the last time you checked the CID list.	was used to dial the
- You can edit the list separately on each station.	number.

22