Uniden DECT4086-3, DECT4086-2, DECT4086-4, DECT4086-5, DECT4086-6 manual Answering system status icons

Base Icon		Handset Icon	What it means
			The ringer is turned off for 1) line 1 only, 2)
			line 2 only, or 3) both. This station will not ring
			when a call comes in on the indicated lines.
			You have a voice message waiting (see "Using
			Voice Message Notification" on page 34).
			Privacy Mode is on: no other station can join
			your call.
			The speakerphone is on.
			The microphone is muted, and the caller can't
			hear you.
	NA		The alarm is set. (See "Using the Alarm
			Feature" on page 32.)
	NA		T-coil mode is on. (See "Do you use a T-coil
			hearing aid?" on page 43.)
	NA		The battery is 1) fully charged, 2) half
			charged, 3) getting low, or 4) empty.
	NA		The signal from the base is 1) very weak, 2)
			low, 3) strong, or 4) very strong.

Answering system status icons

The icons on the right hand side of the base display indicate the status of the answering system. Each icon will appear separately for line 1 (at the top) and line 2 (at the bottom). See Using Your Answering System on page 35 for more information.

Icon What it means

The answering system is off: it will not answer the phone.

The answering system is set to announce only: it will answer the phone but will not record any messages.

The answering system memory is full: you must delete some saved messages.

01 through 59	This number indicates the number of new messages for
	each line.

12