Uniden DECT4086-4, DECT4086-2, DECT4086-3 The Handset and Base Setup Menu, Menu option, Use it to

Close the menu

On the handset, press End; on the base, press mute/ exit.

(If you open the menu during a call, press Back to back out of the menu without hanging up.)

The next several pages list all the available menu options and how to use them. Most of the menus are the same for the base and cordless handsets; any option that is available only for the base or handset is noted in the description.

The Handset and Base Setup Menu

When you open the menu on a handset, this menu is called Handset Setup. On the base, this menu is called Base Setup. Each of these options can be set separately for each station. (A station can be any cordless handset or the base.)

Menu option:	Use it to:
	(Handset only) Turn on T-coil mode to reduce noise on
T-coil	some hearing aids (see "Do you use a T-coil hearing
	aid?" on page 43).
Alarm Setting	(Handset only) Set alarms on your handset (see "Using
	the Alarm Feature" on page 32).
	Select the line you want this station to use as the default
Primary Line	line when you make a call (see "Assigning a primary
	line" on page 20).
	(Handset only) See the ring tones the handset is using
	as the main ring tone for each line. To change the tone,
Ringer Tones	select the line, then choose a ring tone from the list. (As
	you highlight each ring tone, the phone plays a sample
	of the tone. When you hear the tone you want, press
	Ok	.)
	(Handset only) Turn on the personal ring feature. If you
Personal Ring	have Caller ID, this feature lets you assign special ring
	tones to anyone in your phonebook: this handset will
	use the special ring tone when that person calls.

17